Cino Fuzzyscan Краткое справочное руководство - Страница 3

There are four radio link modes available for you to pair Cino FuzzyScan Bluetooth Scanner with Android device, they are

"HID Mode", "HID Legacy Mode", "HID Mode with Passkey" and "SPP Slave Mode". For "HID Legacy Mode", you can pair

Android device simply and easily without entering the passkey. While "HID Mode with Passkey", it is required to enter 4-digit

passkey prompted on your Android device. For more details, please refer to the "Pocket Scanner QSG".

This document describes how to pair Cino FuzzyScan Bluetooth Scanner series with most Android devices. Screenshots in

this document are all for reference only. The actual screens during the pairing procedure will be varied depending on the

Android device you use.

Applicable Models:

Bluetooth Image Scanners

F680BT and F780BT series with firmware version 3.01.04 or above

PF680BT series with firmware 1.00.01 or above

F790BT series with firmware 2.05.02 or above

A770BT series with firmware 1.00.01 or above

PA670BT series with firmware version 1.00.01 or above

Bluetooth Laser Image Scanners

L680BT series with firmware version 3.01.04 or above

L780BT series with firmware version 3.01.04 or above

PL680BT series with firmware version 1.00.01 or above

If your Bluetooth cordless scanner is not with firmware version listed above, please upgrade the firmware.

Preparation

1. Android device

Android device with Android 3.0 or above (Android 4.0 or above recommended). (For HID Legacy Mode and HID Mode

with PassKey).

2. FuzzyScan Bluetooth Cordless Scanner with battery fully charged.