ARC Technology PE3-1500 Краткое руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Адаптер ARC Technology PE3-1500. ARC Technology PE3-1500 3 страницы.

aring:

Pairing using LEARNING MODE:

1. Plug adaptor into a socket (LED will flash), this will now enter learning mode.

2. Within the 5 seconds, with the remote control press the 'ON' button intended to be paired; the

load will flash twice to confirm that the remote control is now paired.

NOTE: Learning mode lasts for 10 seconds; if no signal is given to the receiver then it will

automatically exit learning mode without pairing the device.

！If, during learning mode the load does not flash to confirm, this means that the receiver's memory

is FULL and no further remote control may be paired unless one of the existing remote control is

first unpaired (see below).

nparing:

Removing single device:

1. Pull out the adaptor from socket, after 5 seconds plug adaptor back into socket (LED will flash),

this will now enter learning mode.

2. Within the 5 seconds, with the remote control press the 'OFF' button intended to be unpaired; the

load will flash twice to confirm that the remote control is now unpaired.

Removing all devices:

1. Pull out the adaptor from socket, after 5 seconds plug adaptor back into socket (LED will flash),

Version 2.