Cipax CPX 23020 Установка и пользователь - Страница 14

Просмотреть онлайн или скачать pdf Установка и пользователь для Резервуарное оборудование Cipax CPX 23020. Cipax CPX 23020 18 страниц. Closed tank 3000l
Также для Cipax CPX 23020: Руководство по установке (10 страниц)

Печатать страницу

Drill a Ø121 (+2/-1) mm hole at suitable direction on the

marked area as pictured. Be sure the hole ends up in the middle

of the area in height.

Deburr the hole before the provided rubber sealing is

mounted.

Attach the pipe so about 200mm will be inside the tank.

Rubber sealing

CPX No. 67502

Alternative inlet position

There are two markings for inlet on the tank. These are

intended for use when the tank is equipped as a septic tank.

In some cases it might be necessary to use one of these.

Note that the usable volume will decrease to 2500 L from 3000 L!

All extension necks are attached to the tank in the same way

Clean and place a single string

of the sealant/adhesive provided

around the neck of the tank in

the middle of the area.

Preparation for installation

Mounting the extension neck

Clean the contact surface of the

extension neck, carefully position it in

the center and set it down on the tank.

Avoid moving the extension neck to the

side once it is standing on the tank!