AXTON ATC100 Руководство по установке и эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Автомобильная стереосистема AXTON ATC100. AXTON ATC100 10 страниц. Component systems
Печатать страницуThank you and congratulations on your purchase of this AXTON 2-way component sys-
tem. This loudspeaker system uses very high quality parts and components only. As with
all high-quality car audio components, professional installation is highly recommended. If
you plan on installing this component system by yourself, please read the following instal-
lation guide carefully, before you attempt the installation. You should retain this manual, the
packing and the purchasing receipt for future reference. For any further information about
mounting, connecting or adjusting this speaker system, please contact your authorized
AXTON dealer.
UNPACKING THE SYSTEM
Carefully remove the loudspeakers, crossovers and the accessories from the giftbox and
check whether all parts are in good undamaged condition, and match with the set con-
tents listed below:
2 mid/woofers
n
2 tweeters
n
2 crossovers
n
2 grilles for mid/woofers
n
1 set of mid/woofer mounting hardware
n
2 pcs tweeter flat surface mounting adapter
n
2 pcs tweeter angled mounting adapter
n
1 instruction manual with warranty card
n
Please contact your authorized AXTON dealer if the content of this set is incomplete or
parts of it show signs of transport damage.
BEFORE YOU START
The first step is to choose the most suitable or best sounding location for the speakers to
be installed. Keep in mind that the best looking spot might not be the one that gives you
best sound. The factory OEM speaker cutouts usually provide space and a stable platform
for fast and convenient mounting of new mid/woofer units. To use the OEM speaker cut-
outs is highly advantageous in most cases and it will also prevent you from having to cut
new holes. For the tweeter mounting, some extra care to find the best spots will usually
pay in form of improved front staging and better resolution.
– 8 –
– 8 –
MOUNTING THE MID/WOOFERS
Remove the factory grilles of the door - or if necessary - the complete door panels. The
AXTON speaker EURO-DIN frame mid/woofer units provide bolt and screw holes to fit
a great variety of OEM standard patterns, making them ideal for a direct replacement of
factory installed speakers in European or Asian cars.
Before you attempt to install the new AXTON mid/woofers, you must check the availa-
n
ble installation depth of the left and right front door. To do this, slide down both windows
and hold the AXTON mid/woofers in place to reassure the available installation depth
does suffice. This test is important; failure to do this may let you end up with an impaired
window function!
Connect the corresponding speaker wires to the terminals of the mid/woofer units.
n
Maintain polarities all the way – double check for correct connection. It is very important
to make sure that all the connections are electrically in phase, which means positive wire
(+ or red) is connected to positive terminal, and negative wire (- or black) is connected to
the negative terminal. Reverse polarity connections of mid/woofers will cause a very low
bass output and a messed up front staging.
The cone and surround material of the mid/woofers is 100% water proof. However, a
n
direct exposure of the mid/woofer to water inside the doors should be avoided. In most
cases, protection foils or baffles like ZEALUM ZN-SPB165 can be installed to protect the
speaker.
Check that there are no gaps between the speakers and the mounting surface in the
n
doors. Note that some (newer) cars will require the use of car-specific mounting adapters
made of plastic material. Without them, the Euro-DIN mid/woofers will not fit to the OEM
cutout, or the available installation depth will not be sufficient. Such adapters are usually
available from your authorized AXTON dealer.
Fix the mid/woofer to the speaker mounting hole using the provided screws. If the mid/
n
woofers are directly fixed onto the metal sheet of the door, use the metal clips included
with the mounting hardware. You can now reinstall the factory plastic grilles or doors
panels. In case you have chosen a new location for your mid/woofers (other than factory
cut-out), use the speaker protection grilles.
– 9 –
– 9 –