AXTON A540DSP Руководство по установке и эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Автомобильный усилитель AXTON A540DSP. AXTON A540DSP 17 страниц. 4-channel smart digital amplifiers

Печатать страницу

EQ Settings

In the EQ menu you can build your sound

according to your settings. Depending on

the grade of required accuracy, you can

chose between a 10 and a 31 band para-

metric equalizer.

Swipe to the right/ to the left to get to the

bands outside of the screen area.

In the line „f0" tap on the band you want to

adjust. A pop-up window appears to enter

the value of the center frequency you want.

Confirm with „Ok"

In the line „Q" tap on the band you want to

adjust. A pop-up window appears to enter

the value of the quality factor you want.

Confirm with „Ok"

. Instead you can

also touch "-" or "+" to adjust the Q factor in

0.1 steps.

The quality factor (Q factor) determines the

effect of the EQ filter (bandwidth) on the

frequency band around the chosen center

frequency f0.

Example1: f0 = 1000 Hz

desired bandwidth of EQ filter = 1000 Hz

(i.e. 500 Hz – 1500 Hz) Q = 1

Example2: f0 = 1000 Hz

desired bandwidth of EQ filter = 200 Hz

(i.e. 900 Hz – 1100 Hz) Q = 5

Q factors from 0.3 to 9.9 are possible.

EQ Setting

– 10 –

If required, you can choose independent

equalizer preferences for the front and

rear channels and even for each channel

separately. Simply use the slider Front or

Rear. When you want to do one setting for

all channels (w/o sub) just press the "all"

button

To reset all settings to „0", press the

„Reset" button

in the EQ menu. If

you just want to try out the presets and

then go back to your personal preferences,

exit without saving the app, and then

restart. The app will then load your saved

preferences from the amplifier.

Dynamic Bass

Located in the EQ menu, the "Bass" slider

is a very effective way to increase bass per-

formance without overloading the speakers.

Level at "0" = no Dynamic Bass function

active.

Level at "1" to "20" = the higher the value

the higher the bass increasing. Simulta-

neously a strong subsonic filter is enabled

to protect the speakers from deepest bass

frequencies to avoid damage to them.

Dynamic Bass:

The „Bass" slider

offers the bass level

without overloading

the speakers.

EQ Setting

– 11 –