Arcam SOLO MINI Справочник - Страница 16
Просмотреть онлайн или скачать pdf Справочник для Медиаконвертер Arcam SOLO MINI. Arcam SOLO MINI 18 страниц. Music system
Также для Arcam SOLO MINI: Брошюра (2 страниц), Справочник (20 страниц)
Печатать страницу
system
menu
Balance
Balance allows you to increase the volume of one
channel (left or right) relative to the other. Altering the
balance may help to restore the stereo image for an
off-centre listening position.
Bass
This setting increases or decreases the lower frequency
components of your music.
Treble
This setting changes the relative volume of the higher
frequency components of your music.
Sleep Timer
This timer allows you to specify a listening period, after
which the volume fades into the (silent) standby mode.
CD AutoPlay
(Applies only if source is
.)
CD
This setting controls the handling of a CD inserted
into the front slot. If enabled, the CD plays immediately;
if disabled, the CD waits for a command from the
remote or top panel.
Prog
(Applies only if source is
and a CD is loaded.)
CD
This feature allows you to programme the playing
order of CD tracks. Scroll left or right to highlight any
of the available tracks and press
to transfer it to the
OK
playback sequence.
Configuring the listening settings
Solo Mini allows you to adjust listening settings to suit
your taste, and to customise various system features.
Use the adjacent diagram to navigate through the items
available.
With the unit switched on (blue light showing), press
on the remote control. Now use the
C
and
MENU
B
keys on the remote to move down and up the
{
}
settings available. The
and
keys on the remote
are used to adjust particular settings.
To leave the menu at any time, press
again.
MENU
FM Mode
(Applies only if source is
.)
FM
In some weak signal areas, switching the FM tuner to
'Mono' can be of benefit, as mono requires a much
lower signal strength to produce acceptable results. If
the signal strength in your area is good, leave FM Mode
in 'Stereo'.
DAB Setup
(Applies only if source is
.)
DAB
Selecting 'Scan' (confirm with
) causes Solo Mini to
OK
search for new DAB stations. Found stations are added
automatically to the list of available stations.
Scanning for new stations does not erase stations that
are no longer transmitted – over time, or if you change
location, this may lead to you having stations in your
list that cannot be received. In this case, select 'Erase
settings' (confirm with
), then perform a new scan.
OK
When the scan is complete, only stations that are
currently available in your area are shown.
Store/Erase Preset
This allows you to store a radio station that you have
tuned in to as a numbered preset (confirm with
OK
The station can then be retrieved by pressing the
preset number on the remote.
In the same way, you can erase a particular numbered
preset (confirm with
).
OK
iPod Option
(Applies to
input with rLead connected)
TAPE
This allows you to Enable or Disable control of an iPod
when connected via an Arcam rLead (for rDock, this
feature is automatic).
CD AutoPlay
Enabled
Erase list of stations
OK
Scan for available stations
Confirm preset
OK
).
Confirm preset
OK
iPod Option
Disabled
16
'Power on' mode
MENU
Right
Left
Balance
0dB
B
C
–dB
+dB
Bass
0dB
F
G
B
C
–dB
+dB
F
G
Treble
0dB
B
C
F
G
B
C
Only if source is CD
CD AutoPlay
F G
Disabled
Only if source is CD
B
C
and CD loaded
Only if source is
B
C
FM
F G
Only if source is
B
C
DAB
F G
Only if source is
OK
DAB, FM or AM
B
C
+Preset
–Preset
F
G
B
C
–Preset
+Preset
F
G
B
C
rLead only
F G
iPod Option
Enabled