Arcan ASC8013DLX Краткое руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Открытая тележка Arcan ASC8013DLX. Arcan ASC8013DLX 4 страницы. Service cart with locking top & drawers

Печатать страницу

ASSEmBlY INSTRUcTIONS

Step 3: Connecting the bottom tray to the

chrome legs.

Lift the cart and place on top of the bottom tray with

chrome legs through the square leg-holes. Align bolt

holes in bottom tray with lower holes in legs and

insert a 10mm bolt through the washer, bolt holes,

and legs as shown. Repeat with all remaining holes

in bottom tray.

Step 4: IMPORTANT: Tighten all bolts.

At this point, all bolts should be tightened. Tighten

bolts opposite each other rather than tightening all

bolts on one side first so that cart remains aligned.

Avoid using excessive force when tightening bolts.

Over-tightening bolts can make drawers bind and

hinder their operation.

Step 5: Attaching handles to drawer faces.

Open the bottom drawer of the service cart. Align the

ends of the long handle with the edges of the bot-

tom drawer, so that the channel in the handle covers

all four holes in the front of the drawer. Insert screws

through each hole from inside the drawer and into the

drawer handle channel. Tighten the screws. Repeat

for all remaining drawers using short handles.

Do not allow the handles to over

hang the ends of the drawer faces,

NOTE

as they will interfere with the

operation of the drawer.

Step 6: Attaching casters.

With the provided keys, lock all drawers, the top, and

the Pry Bar Holder to prevent them from opening. Turn

the cart upside down, allowing it to rest on chrome leg

tops with the plastic inserts facing up.

Do not allow the Side Work

Bench to swing freely, as it may

NOTE

be damaged or cause injury as

cart is turned upside down.

Insert the stem of one caster into the hole in a plastic

insert. Using a rubber mallet, hammer the casters into

place until the stem is no longer visible. Repeat with

other casters.

Ensure that both locking casters

NOTE

are on same end of the cart.

Once casters are installed, stand cart upright.

Assembly is complete.

ASC8013DLX: Parts Breakdown & Operating Manual

Bottom

Tray

10mm

Chrome

Bolts

Legs

033109