CIRCLE FITNESS Sp7 Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Велотренажер CIRCLE FITNESS Sp7. CIRCLE FITNESS Sp7 17 страниц.

4
Step three
Attach the saddle (1) onto seat slider (42),
and secure the saddle by tightening the nuts
on both sides of the saddle clamp on the
underside of the saddle, use wrench.
Slide the seat slider (42) into the seat post
(43) adjust to desired position and secure
with the release lever (6) on the bottom of
the seat post (43).
Slide the seat slider (42) into the seat post
(43) adjust to desired position and secure
with the release lever (6) on the bottom of
the seat post (43).
Step four
Attach the pedals (11) into the crank arms
(20)(21), each pedal is marked with L (left) or
R (right) to denote the side of the spinning
bike they are on.
Note - the right hand crank is on the same
side as the belt guard (19). Be careful to
align the threads correctly to avoid
damaging them. Tighten using a 15mm
spanner; both pedals should tighten towards
the front of the spinning bike.
Screw the Clamp (60) on the Handlebar, and
attach the Console (78) on it, then connect
the sensor cable (61) which coming from
main frame with console cables which
coming from handle bar post bottom.
In addition, plug the connector back into the
frame hole and make sure that the cable
stopper (56) is plugged into the hole.
Unscrew the screw (25) on the right fork.
Align the holes of the water bottle cage (26)
with the holes on the fork and secure with
two screws (25).