Axxera AXM140BT Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Автомобильный приемник Axxera AXM140BT. Axxera AXM140BT 19 страниц.

Bluetooth

Pairing a Device

Preparation

Pairing a New Device

Pairing Additional

(Re)Connecting a Paired Device

Most Bluetooth devices support the auto-connect feature, and will connect automatically

if the device is in range when the unit is powered-on. If your device was previously paired

but does not connect, use these instructions below. Some devices require authorization to

allow the auto connect feature.

• If your most recently connected Bluetooth device becomes disconnected or does not

reconnect, press

• To connect a previously paired device that was not recently connected:

1) If applicable, press and hold

2) From Bluetooth mode, press SELECT. "Paired Devices" will appear on the LCD.

3) Turn the volume knob to cycle through the list of devices.

4) Press SELECT or

Note: If the Auto Connect setup menu setting is set to OFF, you must press

connect you device after pairing, and each time the unit is powered-on.

Disconnecting a Device

Press and hold

paired and appear in the PAIRED DEVICES menu, but not be connected.

AXM140BT

Operation

Before you can use a Bluetooth device, it must be paired and

connected. Make sure that Bluetooth is activated on your

device before you begin the pairing process.

The unit broadcasts the pairing signal constantly when

no devices are currently connected. Complete the pairing

sequence from your Bluetooth device. Refer to the owner's

manual for your device for more details.

The device name is "DUAL BT"

The Bluetooth passcode "1234"

Note: The unit can be in any mode of operation when pairing

is performed.

If a device is currently connected, press and hold

Devices

disconnect the current device before a new device can

be paired. Then begin the pairing sequence from the new

Bluetooth device.

from Bluetooth mode to reconnect your mobile device.

to connect to the desired device. It must be in range to connect.

for 3 seconds to disconnect a connected device. The device will remain

OPERATION

to disconnect any connected mobile devices.