Axxess AX-HYKIA1-SWC Руководство по установке
Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары Axxess AX-HYKIA1-SWC. Axxess AX-HYKIA1-SWC 12 страниц. Hyundai/kia datainterface withswc2010-2016
Печатать страницу
INTERFACE COMPONENTS
• AX-HYKIA1-SWC interface
• AX-HYKIA1-SWC harness
• 16-pin harness with stripped leads
• Female 3.5mm connector with stripped leads
APPLICATIONS
HYUNDAI
Elantra *
2011-2016
Sonata *
Genesis Coupe *
2013-2016
Sonata Hybrid *
Santa Fe *
2013-2016
Tucson *
Santa Fe Sport *
2014-2016
* Without NAV
AxxessInterfaces.com
Hyundai/Kia Data Interface with SWC
Visit
AxxessInterfaces.com
for more detailed information about the product and up-to-date
vehicle specific applications
INTERFACE FEATURES
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains audio controls on the steering wheel
• Retains BlueLink
• Designed for amplified* and non-amplified models**
• Retains balance and fade†
• Micro-B USB updatable
* Requires the AX-HYKIA-SPDIF (sold separately)
** Bristol Audio Systems not covered
† Non-amplified models only
KIA
2011-2016
Optima *
2011-2015
Optima Hybrid *
2010-2015
Sorento (with UVO) * 2011-2013
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
2010-2016
2011-2015
Sorento *
2014-2016
2011-2016
Soul *
2012-2013
Sportage
2011-2016
AX-HYKIA1-SWC
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Connections ........................................................ 2-4
Installation .............................................................5
Programming .........................................................6
Steering Wheel Control Settings ...................... 7-9
L.E.D. feedback ....................................................5
Changing radio type ...........................................7
Remapping .......................................................7-8
Dual assignment .............................................8-9
Troubleshooting .....................................................9
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun, solder,
and heat shrink • Tape • Wire cutter • Zip ties
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
NOTE: Refer to the instructions included with
the aftermarket radio.
REV. 9/17/21 INSTAX-HYKIA1-SWC