Epson 11880 - Stylus Pro Color Inkjet Printer Краткое справочное руководство - Страница 7

Просмотреть онлайн или скачать pdf Краткое справочное руководство для Принтер Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 14 страниц. Stylus pro11880
Также для Epson 11880 - Stylus Pro Color Inkjet Printer: Брошюра (1 страниц), Брошюра и технические характеристики (8 страниц), Руководство по распаковке и настройке (28 страниц), Руководство по работе с сетью (46 страниц), Руководство по информации о продукте (10 страниц), Ограниченная гарантия (12 страниц), Брошюра и технические характеристики (7 страниц), Брошюра и технические характеристики (8 страниц)

Печатать страницу
Epson 11880 - Stylus Pro Color Inkjet Printer Краткое справочное руководство
Checking Ink Levels and Replacing Ink Cartridges
Checking Ink Levels and Replacing Ink Cartridges
Before you begin a large print job, you should check your
ink levels. If one of your cartridges is low, you can replace
it before you start. Or you can wait until the ink runs
out, replace the cartridge, and then continue the job.
Checking Ink and Maintenance Tank
Levels
The easiest way to check ink levels is from the control
panel. The numbers below the ink cartridge icons
correspond to the 9 cartridge slots in the printer.
Ink gauges for
9 cartridges
listed below

Replacing Ink Cartridges

When one of the ink bay lights flashes, and INK LOW is
displayed on the LCD, the cartridge is nearly expended.
Check the LCD to see which cartridge is low, and make
sure you have the correct replacement cartridge.
Epson UltraChrome K3
Slot no.
Ink color
1
Vivid Light Magenta
2
Light Light Black
3
Matte Black
4
Light Black
5
Light Cyan
6
Cyan
7
Vivid Magenta
8
Photo Black
9
Yellow
Vivid light
magenta
Matte
Light
Light light
black
black
black
Left, center, and
right maintenance
tank gauges
TM
ink cartridges
Part number
T591600
T591900
T591800
T591700
T591500
T591200
T591300
T591100
T591400
Light
Cyan
cyan
Vivid
Photo
magenta
black
When one of the icons is blank and NOT ENOUGH
INK is displayed, the cartridge is expended. To replace
the cartridge, first make sure the printer is on.
1
Press the ink cover button to unlock the cover, then
open it.
Hole
Note:
the button, insert the end of a paper clip in the
small hole on the upper left corner.
2
Push in the expended cartridge to release it.
3
Remove the expended ink cartridge from the printer.
Warning:
ink may leak. If ink gets on your hands, wash them
thoroughly with soap and water. If ink gets in your
eyes, flush them immediately with water.
4
Make sure the replacement cartridge is the correct
color, and remove it from its package. Gently shake
the cartridge before installing it.
Yellow
6
If the ink cover doesn't open when you press
Do not shake the expended cartridge, or
Continue