Digicom Dual Speed Switch 16 Брошюра
Просмотреть онлайн или скачать pdf Брошюра для Переключатель Digicom Dual Speed Switch 16. Digicom Dual Speed Switch 16 1 страница. Digicom dual speed switch switch specification sheet
Печатать страницуDual Speed Switch 16
DESCRIPTION
Your applications require VLAN, Trunking or QoS?
You need advanced diagnostic functions or
network analysis?
Get all this at the same time!
Dual Speed Switch16 is the suitable, compact and
performing solution!
Any of the 16 ports is 10/100Mbps Autosensing.
Speed and operating mode are automatically detected
and selected.
Furthermore any of the 16 ports can be connected as
"normal" or Uplink port (automatic MDI/MDI-x)
providing easy and direct connection to other hubs or
switches on the network.
This device offers advanced functionalities that
increase the network performances.
It is possible to define up to 32 VLAN with the VLAN
tag support and activate the Port Trunking to carry out
high traffic backbone.
Thanks to the priority functions, the QoS and the
IGMP snooping, Dual Speed Switch 16 is particularly
suitable for the VoIP and Multimedia applications
where the traffic management is very important.
Network activity, speed and status of each port is
shown by led indicators on the front panel. The switch
has got diagnostic functions to determine the ports
and cable status and the signal quality.
Easy configuration through the simple utility with
graphic interface directly fron the LAN network.
For further information: [email protected] or http://www.digicom.it
Code: 8E4090
16 RJ 45 10BaseT/100BaseTx , VLAN
support, Trunk and QoS Priority
Automatic MDI-X to MDI (Cross) on all ports
Full-duplex switch for 10/100 Mbps
groups interconnection
Store and Forward technology
Full speed filtering and forwarding rate
Table memory for 8192 addresses
1,5MByte Buffer Memory
IEEE 802.3, 802.3u, 802.3x, 802.1p,
802.1q
4 trunk support (up to 4 ports) up to 800
Mbps in full duplex, with load balance
and fault tolerance support
Up to 32 VLAN group support with VLAN
port-based, 802.1Q tag VLAN and Leaky
VLAN support
Priority management support with three
different service classes (CoS): Port
based, 802.1p priority tag, TCP/IP
header's TOD/DS classifier
IMGPv1 and v2 port snooping support
Broadcast Storm filtering support
Port Security support for restrictions to
port access
Parameters and monitor configuration
for port with MIB Tx/Rx Packets
counters, CRC, Collisions
Led Indicators: Power, Link/Activity,
10Mbps/100Mbps, Full-duplex
Metal chassis
Desktop
19" rack mounting kit included
110-240 Vac Integrated power supply
20Watt consumption
273 x 166 x 43 mm; 1,5 Kg.
Operating temperature 0 to 50°C
Humidity 5% to 95% non condensing
CE mark
Dual Speed Switch 16 06.12.2005