Axxess AXDSPL-BM1 Руководство по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке для Оборудование для звукозаписи Axxess AXDSPL-BM1. Axxess AXDSPL-BM1 16 страниц. Bmw/mini dspl interface for non-amplified vehicles withpre-wired harness2008-2016
Печатать страницу
16-pin Header
AX-DSPL-BT
BLUETOOTH STREAMING INTERFACE
AX-DSPL-BT
• The AXDSPL-BT Bluetooth streaming interface can be used to stream media directly to
the interface.
• While streaming media the volume on the phone will be used. As an option, the
AXBK-1 (sold separately) can be used to control the volume.
Note: The bass knob included with the AXDSPL-BM1 can be used if it will not be used to
control a subwoofer.
1. Important! Unplug the interface from the vehicle.
2. Remove (4) Phillips screws securing the interface, then remove the top cover, exposing
the circuit board within.
3. Locate the 16-pin header on the circuit board.
4.
Important!
Referencing how the AXDSPL-BT is laid out in the picture, carefully line up
the header pins to the interface. Gently press down to secure.
Note: Both interfaces may be damaged if installed incorrectly.
5. Re-secure the top cover using the (4) Phillips screws previously removed to complete
the installation.
AXBK-1 Installation:
6. Connect the Brown wire from the interface to the Orange wire from the AXBK-1.
Ground the Black wire from the AXBK-1 to the chassis.
Continued on the next page
REV. 10/27/21 INSTAXDSPL-BM1
5