Epson 220 Руководство - Страница 6
Просмотреть онлайн или скачать pdf Руководство для Принтер Epson 220. Epson 220 29 страниц. Epson printer parts manual
EPSON LQ-2080
Roll paper
A
B
printable area
A
A The minimum top and bottom margins are 0.17 inch (4.2 mm).
B The minimum left and right margins are 0.12 inch (3 mm).
The maximum printable width is 8.0 inches (203 mm).
Safety Approvals
120 V model:
Safety standards
UL 1950
CSA C22.2 No. 950
EMI
FCC part 15 subpart B class B
CSA C108.8 class B
230 V model:
Safety standards
EN 60950 (TÜV)
EMI
EN 55022 (CISPR pub. 22) class B
AS/NZS 3548 class B
Acoustic noise
Approx. 50 dB (A) (ISO 7779 pattern)
CE Marking
230 V model:
Low Voltage Directive 73/23/EEC
EMC Directive 89/336/EEC
6 - EPSON LQ-2080
B
EN 60950
EN 55022 Class B
EN 61000-3-2
EN 61000-3-3
EN 50082-1
IEC 801-2
IEC 801-3
IEC 801-4
2/99
Control Panel Buttons and Lights
Font button
Selects the font.
Font lights
Indicate which font is selected.
Condensed button
Turns on the condensed mode.
Condensed light
Lights up when the condensed mode is on.
Pause button
Stops printing temporarily, and resumes printing when
pressed again.
Pause light
On when the printer is paused.
Flashes when the printer is in the micro adjust mode.
Paper Out light
On when no paper is loaded in the selected paper source or
paper is not loaded correctly.
Flashes when paper has not been fully ejected or a paper jam
has occurred.
Tear Off/Bin button
Advances continuous paper to the tear-off position.
Feeds continuous paper backward from the tear-off position
to the top-of-form position.
Selects a cut-sheet feeder bin when the cut-sheet feeder is
installed.
Enters the card mode to print on postcards and envelopes.
Tear Off/Bin lights
f f when continuous paper is in the tear-off position.
o n when bin 1 of the optional cut-sheet feeder is selected.
n o when bin 2 of the optional cut-sheet feeder is selected.
n n when the printer is in the card mode.
n = on, o = off, f = flashing