Axxess ABTI-GM1 Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильная электроника Axxess ABTI-GM1. Axxess ABTI-GM1 8 страниц. Gm class ii interface for handsfree bluetooth car kits

9) Plug the ISO side of the ISO to 8 way harness into the mating Parrot connectors.
10) Take the Mute wire of the Parrot kit and plug it into the "Mute 1" wire in the Parrot ISO
harness.
11) Finish installing the rest of the Parrot handsfree kit and reinstall the OEM radio.
12) Reconnect the vehicles battery.
OPERATION
Refer to the Parrot manual for operation. Adjust the volume of the handsfree kit by turning the
volume knob of the radio. Audio from any source will be muted when a call comes in or a call
is made.
OTHER HANDSFREE KITS
Other handsfree kits can be used with the ABTI-GM1. Follow the steps below to wire the
handsfree kit:
1) Using the ISO to 8 way connector harness cut the ISO ends off.
2) The Yellow wire will go to the Battery wire of the handsfree kit.
3) The Red wire will go to the 12 volt accessory wire of the handsfree kit.
4) The Black wire will go to the ground of the handsfree kit.
5) The Purple wire will go to the Mute wire of the handsfree kit.
6) The White wire will go to the (+) speaker output of the handsfree kit.
7) The White/Black wire will go to the (-) speaker output of the handsfree kit.
Handsfree kits may have more then one speaker output on their harnesses however the
ABTI-GM1 needs only one speaker output to use.
ABTI-GM1
6