DigiDesign FWx FireWire Руководство - Страница 7

Просмотреть онлайн или скачать pdf Руководство для Оборудование для звукозаписи DigiDesign FWx FireWire. DigiDesign FWx FireWire 18 страниц.

Chapter 2: Installing FWx

If you are using an FOH Rack with your VENUE system, see

"FOH Rack FWx Card Installation" on page 3.

If you are using a Mix Rack, see "Mix Rack FWx Card Installa-

tion" on page 6.

For Pro Tools LE installation and compatibility information,

see "Installing Pro Tools LE" on page 9.

This section shows how to install an FWx card into FOH Rack.

Only one FWx card can be installed in an FOH Rack.

To install the FWx card in the FOH Rack:

Shut down your sound system.

Power down your FOH Rack.

Disconnect all power, audio, FOH Link, and any MIDI cables

attached to the FOH Rack.

Remove the front panel faceplate by unscrewing its mount-

ing screws (#1 Phillips). Keep the screws nearby for remount-

ing the front panel later.

Mounting screws (remove all)

Front panel of the FOH Rack

If your system has an HDx TDM Option card installed, dis-

connect its ribbon cable and remove the card.

HDx and FWx cards cannot be installed in the FOH Rack

simultaneously.

On the back panel of the FOH Rack, remove the faceplate on

any available expansion slot by removing the screws holding

it in place. Keep the screws nearby for securing the FWx card

to the FOH Rack later.

Expansion

slot

faceplate

(remove)

Back panel of the FOH Rack

Remove the FWx card from its packing material. Hold the

card by its edges.

Mounting bracket

Faceplate

FWx card showing bracket and connectors

Power connector

Ribbon Cable connector

Chapter 2: Installing FWx 3