Epson 7880 - Stylus Pro Color Inkjet Printer Руководство по работе с сетью - Страница 41
Просмотреть онлайн или скачать pdf Руководство по работе с сетью для Принтер Epson 7880 - Stylus Pro Color Inkjet Printer. Epson 7880 - Stylus Pro Color Inkjet Printer 46 страниц. Warranty statement
Также для Epson 7880 - Stylus Pro Color Inkjet Printer: Краткое руководство по установке (1 страниц), Руководство (12 страниц), Ограниченная гарантия (12 страниц)
Печатать страницу
Chapter 5
Tips for Administrator
Network Setup Menu
These items are used to make network settings on the printer's control panel.
Item
NETWORK SETUP
IP ADDRESS SETTING*
IP*
SM*
DG or GW*
Bonjour*
INIT NETWORK
SETTING*
* Available only when Enable is selected for NETWORK SETUP.
Setting an IP Address Using the arp/ping Command
Follow the steps below to set the IP address using the arp/ping command.
Note:
❏ Make sure that the Set using PING function is enabled on the TCP/IP menu in EpsonNet
Config. If this function is disabled, you cannot set the IP address using the arp/ping command.
❏ Make sure the network interface and the computer are in the same segment.
Before you start, you need the following information:
❏ A valid IP address for the network interface. Ask your network administrator for an
IP address which does not cause conflicts with any other device on the network. If
you are the network administrator, choose an address within your subnet which does
not conflict with any other device.
❏ The MAC (Ethernet hardware) address of the network interface. You can find out the
MAC address on a status sheet.
Settings (default in bold)
Disable, Enable
Auto, Panel
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
On, Off
EXECUTE
Tips for Administrator
41