Epson 980N - Stylus Color Inkjet Printer Руководство по информации о продукте - Страница 9

Просмотреть онлайн или скачать pdf Руководство по информации о продукте для Принтер Epson 980N - Stylus Color Inkjet Printer. Epson 980N - Stylus Color Inkjet Printer 14 страниц. Warranty statement
Также для Epson 980N - Stylus Color Inkjet Printer: Технический паспорт (2 страниц), Технические характеристики (2 страниц), Информационный листок о продукте (4 страниц), Обновление (1 страниц), Ограниченная гарантия (1 страниц)

Epson 980N - Stylus Color Inkjet Printer Руководство по информации о продукте
When you need new ink cartridges, contact your dealer or call
the EPSON Store
at (800) 873-7766 (U.S. sales only). Or
visit the EPSON Store at www.epson.com (U.S. sales only). In
Canada, please call (800) 873-7766 for dealer referral.
If you need to replace an ink cartridge before the lights flash
(because the ink is too old, for example), see the instructions
in "Replacing an Outdated Ink Cartridge" on page 9.

Removing and Installing Ink Cartridges

You can replace a cartridge when the B black or A color ink
out light is either flashing or on. (If you perform these steps
when both ink out lights are off, the printer cleans the print
heads as described on page 11.)
Follow these steps to replace ink cartridges:
1. Remove the new ink cartridge from its packaging.
2. Remove only the yellow part of the tape seal. Don't pull off
the blue portion or try to remove the clear seal underneath
the cartridge.
Remove the yellow tape
black cartridge
You must remove the yellow tape from the top of the
cartridge or you will permanently damage it. Don't
remove the clear seal from the bottom of the cartridge.
3. Make sure the printer is turned on and not printing, then
open the printer cover.
R
4. Press the
cleaning button and hold it for about three
seconds until the print head moves left and the P power
light begins flashing. The print head moves to the black or
color cartridge replacement position, depending on which
ink cartridge is empty.
To avoid damaging the printer, never move the print head
by hand. Don't open the clamp or remove a cartridge
except to replace it with a new one. Once you remove a
cartridge, you can't reuse it, even if it contains ink.
color cartridge
10/00
EPSON Stylus COLOR 980N
5. Pull up the ink cartridge clamp. The cartridge rises up from
its holder.
6. Lift the cartridge out of the printer and dispose of it
carefully.
If ink gets on your hands, wash them thoroughly with
soap and water. If ink gets into your eyes, flush them
immediately with water.
7. Lower the new ink cartridge into its holder with the label
facing up and toward the back of the printer.
8. Press down the ink cartridge clamp until it locks in place.
9. If you need to replace the other ink cartridge, repeat steps 4
through 8 before continuing with step 10.
R
10. Press the
cleaning button and close the printer cover.
The printer moves the print head and begins charging the
ink delivery system.
The P power light flashes, and the printer makes various
sounds. Charging takes about one minute. When it's
finished, the Ppower light stops flashing and stays on.
Never turn off the printer while the P power light is
flashing, unless the printer hasn't moved or made noise
for more than 5 minutes.

Replacing an Outdated Ink Cartridge

If an ink cartridge is more than six months old, you may need
to replace it. How can you tell? You may notice that your
printouts don't look as good as they used to. If print quality
doesn't improve after cleaning and aligning the print head,
you can replace one or both cartridges.
EPSON Stylus COLOR 980N
- 9