Epson ActionPrinter L-1000 Бюллетень поддержки продуктов - Страница 3

EPSON

PRODUCT SUPPORT BULLETIN

DATE: 04/24/87

SUBJECT: FX-86e/286e PAPER DETECTION

The following information should clarify how the FX-86e/286e

paper detection and auto load system operate.

The key to paper detection is

and the beeper will not activate

to transmit data to the printer. See examples below.

* If

the last sheet of a continuous form,

indicator will not turn on

until there is an attempt to transmit data to the printer.

* If the FF was sent by software, the printer will remain on

line until there is an attempt to transmit data to the

printer.

The key to the auto load system is that the printer must be

off line to operate.

* To use the auto load feature under the above circumstance,

the printer must first

the paper bail lever should be pulled to load

then press

there is a FF which

ON LINE to continue printing.

that the paper

unless there is an attempt

ejects a single sheet of paper or

and the beeper

be manually taken off line, then

P-0004

NUMBER:

empty light

the paper out

will not beep

the sheet,