DiGidot PXLNET Руководство - Страница 4

Просмотреть онлайн или скачать pdf Руководство для Передатчик DiGidot PXLNET. DiGidot PXLNET 17 страниц.

INTRODUCTION

SPI protocols are sensitive to data distortion and often only work safely up to 2 meters (6.5 ft) of

cable distance. The DiGidot PxLNet Transmitter is a small extension module that can be connected to

the DiGidot C4 outputs. It converts SPI or DMX TTL signals to PxLNet in order to send them across

large distance. Any industry standard SPI protocol that can be outputted from an SPI controller, can

be converted.

Output the same amount of universes with this transmitter as sent from the SPI controllers output

port(s). This product can not only convert SPI protocols but it also converts DMX TTL signals to

standard DMX512. The PxLNet Transmitter can therefore be used to connect four differential DMX

signals up to 500 meters away.

The onboard voltage regulator accepts voltages ranging from 12 V

Installation is very easy thanks to the RJ45 outputs, which can be connected conveniently to our

DiGidot PxLNet Transceiver modules.

1 x DiGidot PxLNet Transmitter

‣

1 x 2 pin header, DC power terminal connector (already inserted)

‣

Quick start instruction card

‣

NOTE

We put great care in our products and have a high quality control standard. Nonetheless we advise to

double check for missing or damaged items.

In case of any missing or damaged items, please contact your supplier immediately.

Never use damaged products!

Connects directly to DiGidot C4 IO port

‣

Converts SPI and DMX TTL to PxLNet and DMX respectively

‣

Flexible operating voltage from 12 to 24 Vdc

‣

4 isolated RJ45 bus ports for PxLNet

‣

Built in power supply for DiGidot C4

‣

Can be used with any third-party SPI controller

‣

PxLNet Transmitter (20342) Manual

up to 24 V

Version 1.8 - November 2021 |

4 17