CIRCUIT DESIGN MU-1 Руководство по эксплуатации - Страница 16

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Интерфейсы USB CIRCUIT DESIGN MU-1. CIRCUIT DESIGN MU-1 17 страниц. Embedded low power radio modem mu-1/mu-1 usb interface kit

Печатать страницу
The additions and changes are shown below underlined.
Example: Vendor ID = 1234, and product ID = 5678
Ftdibus.inf
[FtdiHw]
%USB¥VID_0403&PID_8372.DeviceDesc%=FtdiBus,USB¥VID_0403&PID_8372
%USB¥VID_0403&PID_6001.DeviceDesc%=FtdiBus,USB¥VID_0403&PID_6001
Add %USB¥VID_1234&PID_5678.DeviceDesc%=FtdiBus,USB¥VID_1234&PID_5678
[ControlFlags]
ExcludeFromSelect=USB¥VID_0403&PID_8372
ExcludeFromSelect=USB¥VID_0403&PID_6001
Add ExcludeFromSelect=USB¥VID_1234&PID_5678
[Strings]
Ftdi="FTDI"
DriversDisk="FTDI USB Drivers Disk"
USB¥VID_0403&PID_8372.DeviceDesc="USB Serial Converter"
USB¥VID_0403&PID_6001.DeviceDesc="USB High Speed Serial Converter"
Add USB¥VID_1234&PID_5678.DeviceDesc="My New USB Device"
Ftdiport.inf
[FtdiHw]
%VID_0403&PID_8372.DeviceDesc%=FtdiPort,FTDIBUS¥COMPORT&VID_0403&PID_8372
%VID_0403&PID_6001.DeviceDesc%=FtdiPort232,FTDIBUS¥COMPORT&VID_0403&PID_6001
Add %VID_1234&PID_5678.DeviceDesc%=FtdiPort232,FTDIBUS¥COMPORT&VID_1234&PID_5678
[Strings]
FTDI="FTDI"
DriversDisk="FTDI USB Drivers Disk"
PortsClassName = "Ports (COM & LPT)"
VID_0403&PID_8372.DeviceDesc="USB Serial Port"
VID_0403&PID_6001.DeviceDesc="USB Serial Port"
Add VID_1234&PID_5678.DeviceDesc="My New USB Device"
Ftdiunin.ini
[Uninstall]
Change Device=VID_1234&PID_5678
Ftdiun2k.ini
[Uninstall]
Change Device=VID_1234&PID_5678
For details, refer to the information concerning changes to the FTDI driver related files.
Note: The USB driver for the MU1-USB has the Circuit Design vendor ID, and you are not authorized to use it.

6.3 Directly Controlling the USB Chip

The USB/UART conversion chip uses the FTDI FT8U232BM, and by downloading the direct driver from the FTDI
website, you can control the USB interface directly without using the COM port.
However, we do not provide support for direct control. This should be carried out on the responsibility of the
developer.
OG_MU1-UIK_v20e
15
OPERATION GUIDE
Circuit Design, Inc.