FCC Compliance Statement
For United States Users
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA. On the back side is a label that contains, among other information, the FCC registration
number and the ringer equivalence number (REN) for this equipment. You must, upon request,
provide this information to your local telephone company. The information associated with the
services the equipment is to be connected are REN: 0.1B, Jack type: RJ-11C.
The REN is useful to determine the quantity of devices that you may connect to your telephone line
and still have all of those devices ring when your telephone number is called. In most, but not all
areas, the sum of the RENs of all devices connected to one line should not exceed five (5.0). To be
certain of the number of devices that you may connect to your line, you may want to contact your
local telephone company to determine the maximum REN for your calling area. For products
approved after July 23, 2001, the REN for this product is part of the product identifier that has the
format US: BKMFA01BC431A. The digits represented by 01 are the REN without a decimal point
(e.g., 01 is a REN of 0.1). For earlier products, the REN is separately shown on the label.
This equipment may not be used on coin service provided by the telephone company. Connection to
party lines is subject to state tariffs.
Should this equipment cause harm to the telephone network, the telephone company may
discontinue your service temporarily. If possible they will notify you in advance that temporary
discontinuance of service may be required. But if advanced notice isn't practical, the telephone
company will notify you as soon as possible. You will be informed of your right to file a complaint
with the FCC. The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the proper functioning of your equipment. If they do, you will be
notified in advance to give you an opportunity to maintain uninterrupted telephone service.
This product is not intended to be repaired. If you experience trouble with this equipment, please
contact:
Name:
Address:
Telephone:
The telephone company may ask that you disconnect this equipment from the network until the
problem has been corrected or until you are sure that the equipment is not malfunctioning.
A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instructions for details.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a
computer or other electronic device, including fax machines, to send any message unless such
message clearly contains in a margin at the top or bottom of each transmitted page or on the first
page of the transmission, the date and time it is sent and an identification of the business or other
40
Notices
Epson America, Inc.
3840 Kilroy Airport Way, Long Beach, CA 90806 U.S.A.
(562) 981-3840
Печатать страницу