Epson B-510DN - Business Color Ink Jet Printer Быстрый старт

Просмотреть онлайн или скачать pdf Быстрый старт для Принтер Epson B-510DN - Business Color Ink Jet Printer. Epson B-510DN - Business Color Ink Jet Printer 4 страницы. Colour printer
Также для Epson B-510DN - Business Color Ink Jet Printer: Руководство по настройке (2 страниц), Руководство по установке сети (20 страниц), Декларация о соответствии (4 страниц), Технические характеристики (2 страниц), Брошюра и технические характеристики (4 страниц)

Start Here

B-310N/B-510DN

Before using the printer, make sure you read the safety instructions in the

User's Guide on your printer CD.

Unpack

If anything is missing, contact Epson as described on the back of this sheet.

The following instructions apply to both the B-310N and B-510DN, unless

otherwise noted.

Note: The appearance of your printer may differ from what you see here,

depending on your model and accessories installed.

Remove all the tape and other packing material, including tape on the

duplexer at the back of the printer. Insert the paper cassette into the printer.

Turn on the printer

Connect the power cable.

Note: Do not connect to the computer at this time.

Press the

button.

*411826000*

Install cartridges

Open the cartridge cover.

Unpack the 4 ink cartridges.

Shake each cartridge for about 5 seconds.

Make sure the cartridge lever is all the way up, then install each

cartridge in the correct slot for its color.

The arrow mark should be on top and pointing toward the printer.

Push each cartridge in until it clicks.

After you install all 4 cartridges, lower the cartridge lever to the

locked position.

Close the cartridge cover.

The printer starts charging the ink. This takes about 5 minutes.

Caution: Don't turn off the printer or open any covers while it is

charging or you'll waste ink.

Note: The printer ships with full cartridges and part of the ink from

this first set of cartridges is used for charging the printer.

Cartridge lever