Epson C11C658011 Руководство - Страница 10

Просмотреть онлайн или скачать pdf Руководство для Принтер Epson C11C658011. Epson C11C658011 13 страниц. Ultra hi-definition photo printer
Также для Epson C11C658011: Брошюра (2 страниц)

Печатать страницу

Epson Stylus Photo R380

6. Press

Start

The printer runs a head cleaning cycle and a message

appears on the LCD screen. Cleaning takes approximately

30 seconds.

Caution: Never turn off the printer while the message "Print

head cleaning in progress. Please wait." appears on the LCD

screen. You may damage it.

Do not insert the CD/DVD tray during cleaning.

7. When cleaning finishes, press

test pattern.

8. If there are no gaps in the pattern, press

Maintenance menu.

If there are gaps in the pattern, press

print head again.

If you don't see any improvement after cleaning four or five

times, turn the printer off and wait six hours. This allows

any dried ink to soften. Then, try cleaning the print head

again.

Examining the Nozzle Check Pattern

Examine the nozzle check pattern you printed. Each staggered

line should be solid, with no gaps, as shown.

❏ If your printout looks okay, you're done.

❏ If you see any gaps (as shown below), clean the print head

again.

Epson Stylus Photo R380

10 -

. The printer prints a

Start

to return to the

to clean the

Start

10/06

Aligning the Print Head

If your printouts look grainy or blurry, or you see light or dark

lines, you may need to align the print head.

Note: You may also see lines in your printouts if your cartridges are

low on ink or you need to clean the print head.

Caution: Do not press the

printing an alignment sheet.

The steps below explain how to align the print head using the

printer's control panel. (You can also do this using your

computer. See your Printer Basics manual or on-screen

User's Guide for instructions.)

1. Make sure the CD/DVD tray is not inserted in the printer,

and make sure the front tray is in the paper (lower) position.

2. Make sure the printer is turned on but not printing, and no

warnings or errors are displayed on the LCD screen.

3. Make sure letter-size plain paper is loaded in the printer.

4. Press

to enter the Setup menu.

Setup

5. Press l or r to select

Maintenance

6. Press u or d to select

Head Alignment

7. Press

. An alignment sheet is printed.

Start

8. Examine pattern #1 and find the square that is most even,

with no streaks or lines.

9. Press r then u or d to select the number for that square.

10. Press

11. Press d to select the next pattern, then repeat steps 8

through 10.

12. When you've finished your selections for each of the four

patterns, press

. You see the message "Print head

alignment is complete."

Stop/Clear Settings button while

, then press