Aybey Elektronik CBP Руководство по программированию и установке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по программированию и установке для Монитор Aybey Elektronik CBP. Aybey Elektronik CBP 4 страницы. Custom design lcd display board
Печатать страницу
PROGRAMMING
On board, there are 3 buttons named as INC (↑), DEC (↓) and ENT. ENT button is used to enter and
exit to/from programming mode, to approve and to save settings. INC (↑) and DEC (↓) buttons are
used to increase and decrease current value and move up and down in menu.
FLOOR DISPLAY SETTINGS
Push and hold ENT button a few second to enter programming mode where arrows and busy icon
always blink to distinguish it from normal mode. Floor number blinks to set and you can change floor
number with INC (↑) and DEC (↓) buttons. Then with ENT button, right display and left display can
be set.
This display shows upper menu of Floor 0 (bottom floor). To edit Floor 0 display data, push ENT
shortly and enter sub-menu.
Here right char blinks. Now it can be changed by pushing INC (↑) and DEC (↓) buttons. Any number
or letter can be chosen. After selecting right char push ENT shortly and left char starts to blink. In the
same way left char is set.
After setting all floor displays push and hold ENT button a few seconds, then all setting are saved into
permanent memory. At any step of programming it is possible to save changes and exit in the same
way. Now display turns to normal mode and shows current floor info.
3
F/7.5.5.02.104 R:1
CBC /CBCT /CBP