Aybey Elektronik CLP Руководство по программированию и установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по программированию и установке для Монитор Aybey Elektronik CLP. Aybey Elektronik CLP 5 страниц. Custom design lcd display board

Печатать страницу

LOADING DEFAULT LISTS (Only in CLP Board)

CLP board allows you to change all values. Beside this, you can load default lists at any time. Default

lists are adjusted as such that -1, 0, 1, 2..... or 0, 1, 2, 3 from floor 0 to top floor. You can load all these

values at one step.

When you set Floor 0 to a value such as -2 and if you save it by holding ENT, DEC (↓) and INC (↑)

buttons all, then the next floors automatically set to -1,0,1...

RUN MODE

Push and hold INC (↑) and DEC (↓) button to enter run mode settings. In this menu system allows you

to set

Floor Selector

Board ID (Only in CLC/CLT)

Floor Number

Sliding Displays

FLOOR SELECTOR

CLP board can be driven by 7 Segment, Gray Code, Binary Code or Counter systems inputs. CLC and

CLT boards only can be driven by CANBus. Additional to floor selectors, simulation mode can be set

to simulate system work.

RM letters on display shows Run Mode. Submenus of this mode are

BN:

Binary Code

GR:

Gray Code

7S:

7 Segment

CN:

Counter

CB:

CANBus

SM:

Simulation

ID DEFINITION

(Only in CLC and Board)

ID information (0 to 63) of CLC and CLT boards must be set to identify address of it in CANBus

communication. ID letters on display shows this menu.

FLOOR COUNT DEFINITION

Floor count at simulation mode can be set in this menu. SF letters on display shows this menu.

SLIDE DISPLAY SETTINGS

Set this menu to 1 for floor information and arrow set as a slide type at changes. SL letters on display

shows this menu.

F/7.5.5.02.87 R:2

CLC / CLP