Digiflex SMART RF RF120 Справочное руководство установщика - Страница 5

Просмотреть онлайн или скачать pdf Справочное руководство установщика для Трансивер Digiflex SMART RF RF120. Digiflex SMART RF RF120 8 страниц. Base station with relay outputs

Печатать страницу

Configuring RF110 Keyfob Button Functions

MENU 6-2-6 is used to customise the button functions

on the RF110 SMART RF 2-way keyfobs. Each of the 5

buttons can be programmed with two independent

functions if required with buttons 1 to 5 being a single

press function and buttons 6 to 10 being hold down

functions .

Up to 10 different functions in total can be programmed.

Figure 8: RF110 SMART RF Keyfob

To trigger the hold down function you must press

and hold the keyfob button down for 2 seconds.

Note

SMART Keyfob Function

1) Press [MENU] + [6] + [2] + [6]. The keypad will

display the following options.

Button Function

Button Assignment

Exit

Press  OK or SAVE

2) Use the up and down arrow keys to select the

Button Function option and press OK.

3) Use the up and down arrow keys to select the

Button to program (1- 10) and press OK.

Remember buttons 6 to 10 are hold down

functions.

4) Use the up and down arrow keys to select the

required function from the list of options and

press OK.

The following button functions are currently

available.



MENU 6-2-6

E&OE

5) Once the button functions have been configured

you need to set the function assignments for each

button. Select the Button Assignment option from

MENU 6-2-6 and press OK. Select the button to

configure and press OK.

6) The type of assignment available for each button is

determined by the button's function.

The button functions Disarm, Arm, Part 1 and Part

2 must be assigned to one or more areas. The

button function Door must be assigned to a door,

button function Output to an output and button

function Macro to a macro.

7) Using macros, it is possible to configure a single

button to open multiple doors or to operate

multiple outputs.

MENU 6-2-6 SMART RF Keyfob Function is only

effective when using the RF110 keyfobs. Other

Note

keyfobs have fixed button functions that cannot be

configured separately.

Figure 9: SMART Keyfob Functions In RAS Software

P/N: RF120-RF121IRG Rev 1.30

Disabled

Disarm

Arm

Part 1

Part 2

Door

Output

Macros

Page

