ARCHITETTURA SONORA SPHERE Руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Динамики ARCHITETTURA SONORA SPHERE. ARCHITETTURA SONORA SPHERE 4 страницы.

5 >
nylon cable ties closing the "candy",
unroll the acoustic dumper to make
possible any intervention in the
crossover box. Open the box and
desolder the bipolar cable.
(For proper interventation on crosso-
ver box and board please refer to next
paragraphs 1.1 and 1.2)
1.1 > Crossover Board Removal:
x
y
x
1.2 > Crossover Cables Removal:
1 >
Open the box with the Phillips screwdriver (C)
2 >
Desolder the six connections using the welder (H). Remember the phases.
3 >
Unscrew the sealed cable glands (
2.0 > Assembly Procedure:
1 >
dy cabled, with the protecting net and the
heat-shrinking sheath securing it.
Insert the bipolar cable into the Sphere's
body throughout the proper hole.
Rests the base on the sphere, making sure
that the holes on the base ange coincide
with the ones on the body ange.
Using the cutter (A) remove the
-
x
white
+
LF
brown
y
x
y
) using the two at wrenches #17 (E) and pull the cables out.
IMPORTANT: the base comes alrea-
3 >
Once you are done, close the crosso-
ver IP65 waterproof box adn wrap the acou-
stic dumper sheet around it so that it looks
like a "candy".
+
1 >
brown
2 >
+
HF
yellow
3 >
-
-
LF
HF
green
white
6 >
Remove the crossover IP65
waterproof box. Slip the bipolar cable
out from the Sphere's body. Now the
base is detached from the body and
can be removed/replaced.
Open the box with the Phillips screwdriver (C)
Desolder the six connections using the welder (H).
Remember the phases.
x
Unscrew the 4 screws (
) securing the board to
the box and remove the board.
2 >
Open the crossover box and solder
the bipolar cable. (For proper interventation
on crossover box and board please refer to
following paragraph 2.1).
4 >
Seal the acoustic dumper
wrapping by closing it with the two
nylon cable ties.