ARCHITETTURA SONORA ASD8 Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель ARCHITETTURA SONORA ASD8. ARCHITETTURA SONORA ASD8 14 страниц.
Печатать страницу2. Introduction
Thank you for purchasing this Architettura Sonora power ampli er. AS ampli ers are multi-channel ampli ers designed speci cally to drive
the architectural loudspeakers manufactured by Architettura Sonora.
Please read the following directions to obtain the best results.
Architettura Sonora power ampli ers feature class-D power modules, combining high sound quality and energy ef ciency, and preampli ers
circuits based on the latest generation class-A VCA (Voltage Controlled Ampli ers).
The available con gurations, diversi ed by number of channels and available power, allow to assemble, in the most simple way, sound
systems from the most basic to the most complex.
The integrated ampli ers' available power and quality make them the ideal solution to be used in any application requiring to drive a large
number of quality speakers.
Some models of ampli ers come with internal DSP (Digital Signal Processor), accessible only by trained personnel and pre-programmed in
our laboratories according to the client's instructions and requirements.
All AS ampli ers have the Master Volume Control, which allows to adjust the volume of all output channels through the knob on the front panel.
Unpacking >
IMPORTANT: Immediately inspect the package and its content in order to check whether there are any signs of damage
that may have occurred during transit. After unpacking check the product in all its parts; if you notice any damage inform your dealer
immediately. It is advisable to save the packaging materials even if the ampli er shows no sign of shipping damage; you might have to return
it to Architettura Sonora or to one of its dealers. Use the original package only, which is the best way to protect the equipment from shipping
mishandling.
Check the contents of the package:
- 1 ampli er;
- 1 copy of the user manual;
- 1 rack mounting brackets set (see chapter 6);
- 1 power supply cable;
- 1 bag containing a number of Neutrik® SpeakON NL4 connectors suf cient for wiring the loudspeaker.
Installation/Assembly >
may be installed in a 19'' standard rack stand through the proper rack mounting brackets provided into the box.
When the unit is installed in a cabinet or in a case, make sure that the ow of air, necessary for proper cooling, is not
obstructed.
Do not block the air vents on side panels.
Avoid installation in places with high temperatures, dust, excessive humidity or water next to the devices, presence of strong
magnetic elds and vibrations.
Close, using blank rack panels, any open space in the rack.
Leave the rear of the rack open. If this is not possible, install a suitable hot air exhaust system.
The high current drain of very high power ampli ers requires an adequate system for AC mains power supply.
It is thus mandatory to use a suitable electrical panel, built in compliance with the applicable country-speci c, technical and
safety regulations, tested by a quali ed technician.
3. User Instructions
Maximum Power Consumption >
the end of this manual). Please ensure that the voltage of the mains supply complies with the label found at the back of the ampli er. Maximum
power consumption is limited solely through the internal fuses.
Warning: before any audio connection keep in mind that the regular
procedure is to turn off the ampli er, unplug it from the mains and
set the volume control to the minimum during start up.
Cooling >
Pay particular attention to the ventilation/cooling conditions of the ampli er. An internal system of forced air ow, by a variable
speed fan, allows cooling from the heat generated by power parts; the fan automatically runs faster when the amp is working hard.
Do not block the lateral air vents!
The air ow is directed through the ventilation grills on the side panels of the ampli er; make sure that the ventilation grills are clear of
obstructions and pay particular attention to leave at least 20 mm from the unit's sides and the cabinet side walls.
If the ampli er is installed in a rack cabinet make sure there is enough air clearance: air should easily ow through the ampli er and meet
no resistance.
The unit may be used free-standing, installed in either a rack cabinet or a ight-case box. All models
Check whether there is enough mains power to supply the ampli er (refer to the data at
4