Digifly Flyer Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары Digifly Flyer. Digifly Flyer 16 страниц.
Печатать страницуWhen this comes down under 20 hours, a flashing "
message is displayed on the multifunction display.
Warning!!! Insert new batteries within a minute from the removal of the
old ones in order to avoid the loss of the Date and Time data. In this case
adjust them again ( see 2.6).
3
Units of measure
To change units of measure select
parameters. The parameter
altimeters display in mt or ft and varios in m/s or fpm x 100.
When
ft
is selected the digital vario indicates fpm x 100 and and the
analog bar indicates fpm x 200. The parameter
(0=km/h, 1=mph) selects the air speed in km/h or mph.
The parameter
degrees or Fahrenheit degrees.
4
Flight Recorder
In order to START the recorder
press the key
confirmation a blinking " rec " will be displayed on te left of the display
for all the duration of the recording.
To STOP the recorder
appear and then press the key
In order to visualize a flight
submenu and press the key
- the first numerical display shows the minimum and maximum value
of the "ALT1" altimeter and the "total gain of altitude of the current
flight", press the
When the altimeter is displayed and the unit is set to display in feet, the
altitude is indicated in tens of feet.
temp
(0=°C, 1=°F) selects the thermometer in Celsius
, the message "
: press the key
key in order to choose between the displays.
unit
submenu and then adjust
alti
(0=meters
: press the key
star
", will appear initially and after
, the message "
within two seconds to confirm.
press the key
. The flight data are shown in this way:
Page 7
low bat
1=feet) changes
ias
and subsequently
stop
, select the "
"
" will
peak
"