Creek Audio AMBIT TUNER Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Автомобильный приемник Creek Audio AMBIT TUNER. Creek Audio AMBIT TUNER 10 страниц. Plug-in fm/am tuner
Печатать страницу1. Seek or manually tune to a station; Press and hold PRE button until a Preset
location number flashes on the screen in place of FM or AM text. The flashing num-
ber indicates the preset location immediately following the last one in use, making it
convenient to program a series of presets in a row. If you wish, you can change the
offered preset location by turning the control knob. To confirm and store the tuned
frequency into the selected preset location, press PRE again briefly. The received
station is now stored in your chosen location. N.B. The flashing number will time-out
and the preset store operation will be cancelled in about 9 seconds, without any user
input.
2. Repeat the steps above for any subsequent station(s).
3. Automatically SEEK and store all stations of a usable quality in Preset locations
starting from the last one in use. Press PRE and TUNE together and hold down for
about 3 seconds, until the Receiver starts to SEEK automatically starting from the
currently tuned frequency up and wrapping around the band edge to complete the
seek throughout the entire active band. All stations with a reasonable signal strength
and quality encountered during seek will be memorised and given a Preset number
in succession. Auto Preset can be helpful during initial use of the Receiver or upon
moving antenna location to be able to quickly browse through all the available sta-
tions instead of having to seek or tune manually. With all the available stations re-
siding in Presets, you can simply browse to the station(s) of interest and store them
again into a new preset location of your choice in an order of your choice.
4. To clear all stored Pre-sets (along with all the Receiver preferences), select Facto-
ry Defaults from the SETUP MENU. See details.
RDS (RBDS in the USA) means Radio Data Service or Radio Broadcast Data Service.
Most international FM stations broadcast RDS. If the received signal is strong enough and
if the station is broadcasting RDS data, the OLED display will switch from showing fre-
quency to RDS information. See further details in the MENU section.
DISPLAY
The EVOLUTION 50A's OLED display shows the following status of the AMBIT Tuner and
Amplifier:
1. Pre-Set station number 01 -99
2. Frequency
3. BAND (AM/FM)
4. RDS
5. Radio metrics show at the top of the display, in a graphical form.
6. Signal strength, is shown as an antenna with a bar graph.
7. Signal Quality, is shown as Q with a bar graph. It is based on a combination of
Page: 4