Creek Audio AMBIT TUNER Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Автомобильный приемник Creek Audio AMBIT TUNER. Creek Audio AMBIT TUNER 10 страниц. Plug-in fm/am tuner
Technical specification
FM Frequency range
AM frequency range
Tuning Increments
AM: 9 kHz AM or 10 kHz (selectable for region)
Pre-set stations
Station programmin
Sensitivity (Audio SINAD = 26dB max RF gain) -3.5 dBuV
Image rejection
Adjacent Channel rejection
Alternate channel rejection
Frequency response (FM only)
Total harmonic distortion
Stereo separation (FM only)
Signal to noise (FM only)
De-emphasis
Appendix
If more than one EVOLUTION 50 is being used, it may help to join them together via the
remote connections on the rear panel, using a special interface cable from Creek Audio.
This will synchronise the operation of both products. Check with your supplying dealer for
details.
SOFTWARE INSTALATION
The AMBIT module contains additional software to enable the EVOLUTION 50A amp to become a Receiv-
er. When the amp is first turned-on, after adding the AMBIT module, there will be a slight delay as the new
software is downloaded from the module into the amp's system microcontroller. Once this is completed, the
OLED display will show the extra features and the amp will work as normal.
This is how to confirm the Software revision: Power-off, Press and hold the INFO button, then press the pow-
er button-on and release the INFO button after the Creek logo disappears. The display will show the model
name, software version number and heatsink temperature. To clear the screen and use the product, press or
turn any control button or knob.
Page: 7
76 - 108 MHz
520 - 1710 kHz
FM: 50, 100 and 200 kHz
99 for FM/AM combined
Manual or Automatic
>70dB
>65dB
>70dB
30 Hz- 16 kHz -1dB
<0.1%
>40dB
>70dB (Full limiting) Stereo
50 or 75 µsec selected for region
(selectable for region)
(selectable for region)
(selectable for region)