Archon CS-WM Руководство - Страница 9

Просмотреть онлайн или скачать pdf Руководство для Оборудование для фитнеса Archon CS-WM. Archon CS-WM 10 страниц. Wall mount cable station

--------------------------------------------------------------------------------------------------------------------------------------

The steel undercarriage can be cleaned with a damp cloth and a (non abrasive) liquid household

cleaner.

After some time, the sliding and turning parts could run less smoothly, because of pollution and

dehydration. You can re-grease the pulley with ball bearings grease (which you can obtain at a

bicycle shop or hardware store). If required, the guiding bars of the weights can be greased with a

little oil.

Check the cord and the cord fixations regularly for signs of wear. In case of excessive wear and tear,

the cord must be replaced and use of the pulley is not recommended until the cord has been

replaced.

In order to obtain spare parts please contact Archon.

Installation

The Pulley must be installed in such a way that its use is not

limited by other objects. Recommended to keep at least 5 feet

free around unit.

The units must be attached to the wall with suitable fittings.

Contact a local contractor to do the install if you are not

comfortable. Mounting hardware for concrete walls are

included. Go to local hardware store if mounting to wood

studs. Do not mount to dry wall. The Pulley must only be

mounted on a brick or concrete wall. You must mount both top

and bottom brackets.

www.FITARCHON.com

888-6FITGYM (634-8496)

CS-WM MANUAL