Creekvine Designs FT1206-2CVD Инструкции по сборке

Просмотреть онлайн или скачать pdf Инструкции по сборке для Газонное и садовое оборудование Creekvine Designs FT1206-2CVD. Creekvine Designs FT1206-2CVD 2 страницы. Treated pine garden bridge

Печатать страницу
Treated Pine Garden Bridge Assembly Instructions
Treated Pine Garden Bridges shown. Your bridge may differ from the above images.
Hardware
NOTE: Each bridge ships with the
appropriate number of screws
required for assembly.
Parts List
Number of Beams
Number of Posts
Number of Deck Boards
Number of Pickets
NOTE: Beams are shipped in two pieces for bridges 8' long and over.
For 4' and 6' Bridges, please skip Step 1 and proceed to Step 2 on the next page.
Step 1:
Join two beams together using included stainless steel splicer plate
and (8) 2" carriage bolts. Make sure the plate is attached to the same
side of the beam as the cutout notch.
Tools Required for Assembly
Power Screwdriver or Drill
Socket Set
Hammer
4' Long
6' Long
2
2
4
4
9
14
6
12
8' Long
10' Long
2
2
6
6
18
23
20
28
12' Long
2
6
27
36