Ayra 9000-0021-6272 Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Светильник Ayra 9000-0021-6272. Ayra 9000-0021-6272 20 страниц. 4x4 rgb cob led matrix panel
Печатать страницу
SHND: Select the correct Show mode if you are going to use the master/slave mode with multiple fixtures,
where each fixture needs to receive the right signal. The Show modes are optimized for 2, 4 or even 16
fixtures, which will work together seamlessly if mounted in the right order. (Explained further on in this user
manual)
SOUN: The sound state shows if the built-in microphone of the unit is active or not. It can be enabled or
disabled in the menu with the ON/OFF selection.
SENE: The sensitivity of the built-in microphone is adjustable, in order to optimise the built-in sound-
controlled mode. For example, when your music source (speakers) is placed far away, it is possible to
increase the sensitivity to make sure that the fixture responds to the sound accurately. The sensitivity can be
adjusted from 0 to 100, where 100 is the most sensitive.
BLND: LED display on/off. When using this device in a club or theatre, the environment is mostly dark.
Therefore, it is possible to shut off the LED menu display light when it is not in use. The default setting is ON,
which means that the LED display remains on all the time. When turned off, the display will turn off when not
used for around 1 minute.
DISP: Display flip function. When you invert the display status, the status of the buttons will also change.
From the correct reading position, Menu is always left and Enter is always right. This may be practical if you
install the device hanging near a wall and can not read the status easily.
TEST: When this mode is selected, the unit will test each LED colour of all pixels. This process continues
until the process is disabled through the menu.
HOUR: Service intervals are primarily used by companies who rent products for all kinds of purposes and
users who use the fixtures frequently. So after a particular number of hours, the fixture is brought in for
service, to check if all components are in good shape and to fix any problems. This function displays the
number of hours that the product has been used.
VER: Displays the firmware version that is installed on the PCB. Users can not upload new firmware to this
fixture.
REST: Resets the fixture without requiring you to remove the power cables or switch the product off.
All information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0
Creation date + author initials: 13-05-2015 RV Revision date + author initials: