Archos 32 Вопросы и ответы - Страница 10

Просмотреть онлайн или скачать pdf Вопросы и ответы для Планшет Archos 32. Archos 32 14 страниц. Internet tablets

Печатать страницу

If you do not have access to the

Android interface

1. When turning on the device, hold

down Vol + and press the power button.

The

ARCHOS

displayed. Use Vol + and - to switch

between options and the power button

to validate your selection.

2. Select 'Repair system' and press

power.

3. In the Repair system screen, select

'Force

touchscreen

press power.

4. Press power again to confirm. Put

your product on a flat surface.

The

calibration

starts. Do not touch the product until

the calibration is complete.

IMPORTANT: If you do not put the

device on a flat surface (e.g. Table), the

touchscreen

calibration

successful.

5. At the end of the calibration, press

power. The ARCHOS Recovery screen is

displayed.

6. Select No. Your device will reboot.

The touchscreen is now recalibrated.

My device "froze". What do I do? How do I prevent that?

If your device freezes, press and hold

the power button for 15 seconds. This

will shut off the device. Restart as

normal. To prevent this, make sure you

are running the latest version of the

firmware. Check by going to Menu >

Settings > About Device > Firmware

Update.

My Archos will not start to Android, it keeps restarting or showing a

black screen whenever I switch it on, what can I do?

If either in the settings or through an

app there has been a problem and you

can no longer get to the Android

interface to do a factory reset, then you

can do a full update and recovery of the

system through Recovery Mode.

Important: before going into recovery

URL: http://faq.archos.com//index.php?action=artikel&cat=138&id=90&artlang=en