Cremesso UNO Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Кофеварка Cremesso UNO. Cremesso UNO 13 страниц.

Making coffee or tea / After making coffee/tea

Making your first coffee/tea!

Each cup requires one cremesso

capsule. Other capsules will not

work. Vent the piping after long

pauses ➔ p. 16.

Place cup under the outlet.

Good to know

The coffee/tea key flashes white after pressing if heating up is still in pro-

gress. Output starts when it stays white.

Tip: use thick preheated cups for Ristretto and Espresso to keep your coffee

warm. Preheat cup: fill coffee

Vent piping: after long pauses (e.g. vacations) the piping will contain air

(➔ page 16 «Flush and vent machine and piping»)

Before changing between coffee and tea: Without capsule, press key

to flush out piping (➔ page 16 «Flush and vent machine and piping»).

Load capsule: 1. Push lever right

back. 2. Let capsule fall squarely

into chute. 3. Pull lever right for-

ward (to puncture capsule)

(withouth capsule) in cup.

Coffee/tea output: Press key

(flashes). To stop the output press

the same key again

Capsule: The capsule may stick in the opening if it has been there a long time. If

so, open and close the operating lever. If the capsule is still blocked, push down

lightly with a finger (caution: hot sharp opening point inside!).

After opening the operating lever, water may drain into the tank. This is normal

and not a fault.

Important:

– Beware of hot coffee/tea: danger of scalding!

– Coffee/tea output is only possible with closed operating lever

Eject the capsule: 1. Push operat-

ing lever right back to eject empty

capsule. 2. Pull operating lever right

forward