Crena HS100-2 Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Нагреватель Crena HS100-2. Crena HS100-2 11 страниц.

FOR YOUR OWN SAFETY

Read all instructions before using the fan heater.

Only connect the fan heater to a single-phase socket with a main voltage as

specified on the rating plate.

This appliance meets the electromagnetic compatibility requirements

specified in EN 55104/95 with regard to interference with radio and TV sets.

Do not leave your home while the appliance is in function: ensure that the

switch is in OFF (0) position and the thermostat is in minimum position. Always

unplug the appliance.

Keep combustible material such as furniture, cushions, bedding, paper,

clothes, curtains etc. At least 100cm away from the fan heater.

If wall mounted do not fix to combustible material such as wooden, synthetic

or plastic surfaces. Do not hang anything on or in front of the fan heater.

Always unplug the heater when not in use. Do not pull the cord to unplug

the heater.

Keep the air inlet and outlet free from objects: at least 1 m in front and 50

cm behind the heater.

Do not install the heater right below a socket.

10. Do not let animals or children touch or play with the fan heater. Pay

attention! The air outlet gets hot during operation (more than 80 , or 175 F).

11. Do not cover. If covered, there is the risk of overheating.

12. Do not use this fan heater in the immediate surroundings of a bath, a

shower or a swimming pool.

13. Do not use the fan heater in the rooms with explosive gas or while using

inflammable solvents, varnish or glue.

14. If the cord of this appliance is damaged discontinues use of this product and

contact the manufacturer for further instructions.

15. Keep the fan heater clean. Do not allow any objects to enter any ventilation

or exhaust opening as this may cause electric shock, or fire or damage to the

heater.

The appliance requires no installation; it should be used solely as a portable

appliance.

- Turn the thermostat knob (right) in a clockwise direction until it reaches the

maximum setting.

- Summer service (ventilation only): turn the knob to setting

- Heating at reduced power: turn the knob (right) to setting ● (1000W).

- Heating at full power: turn the (right) to setting ●● (2000W).

- Switching off: turn the knob (left) to setting 0.

REGULATING THE THERMOSTAT

When the room has reached the required temperature turn the right thermostat

knob (where included) in an anti-clockwise direction up to the point where the

appliance switches off and not beyond. The temperature fixed in this way will be

automatically regulated and kept at a constant level by the thermostat.