Creo iQsmart 2 Дополнение к руководству пользователя - Страница 2

Просмотреть онлайн или скачать pdf Дополнение к руководству пользователя для Сканер Creo iQsmart 2. Creo iQsmart 2 16 страниц.

Figure 2: Power and status LEDs on the operating panel

The Status LED blinks green, during a series of self-tests. When the Status LED is steady

green, the scanner is ready for operation.

If the Status LED remains red or blinking green (indicating a failure), do the

following:

Turn the scanner off and then on again.

If the LED is still red, call your Service Engineer.

NOTE: Shut down by quitting the application then switching off the Main Power switch

located on the back panel. For temporary, short term shutdown, press the shutdown button

located on the operating panel.

Startup Sequence

To start up the scanner, do the following:

1. Switch on the Main power switch on the back of the scanner.

2. Press the Power button on the Operating panel. The Power LED on the operating panel is

green.

oXYgen Scanning Application - User Guide Addendum