FIALA MOTORS FM 60s1-FS Инструкции - Страница 3
Просмотреть онлайн или скачать pdf Инструкции для Двигатель FIALA MOTORS FM 60s1-FS. FIALA MOTORS FM 60s1-FS 3 страницы.
Печатать страницуmotorcycle chains with the resistance up to 150°C. The way and place of lubrication
are shown on the figure number 4, 5.
No. 4
The following should be checked from time to time for correct operation of the engine:
cleanness of the engine, state of ignition batteries and distance of spark plug
electrodes which should be adjusted to 0.4 mm. If the electrodes are burnt, replace
the spark plug.
9. Carburetor
A Walbro carburetor (no. 6) which is basically adjusted on the engine is used as
standard. There are two rotary needles (L-low, H-high) on the sidewall.
The H needle is used to adjust the high revolutions and the L needle is used to
adjust low ones. Basic adjustment needles is 2,5 turns for L needle and 4
turns for H needle.
Fine
tuning
of
the model.
Figure no. 7 – Tube is used for crankcase ventilation and as a drain of superfluous
oil. Tube must remain free. Do not reduce its cross section or extend!
10. Repairs of the engine
Should any defect appear during the guarantee period, contact your seller who will
resolve this problem with you or contact the manufacturer of the engine directly.
We wish you a lot of satisfaction with our products.
Replacement of the other parts should be consulted with the seller or with the engine
manufacturer.
No. 5
the
carburetor
The intake RAM tube is
absolutely neccesary!
Without it, the engine will
run too lean !!!
No. 6
is
recommended
No. 7
after
installation
into