Creos Smarty Техническое описание - Страница 16

Просмотреть онлайн или скачать pdf Техническое описание для Измерительные приборы Creos Smarty. Creos Smarty 20 страниц. Functionalities of intelligent electricity meters

Печатать страницу
For reasons of privacy, data sent via this port is encrypted. The
decryption key is available from your grid operator or your supplier.
Please contact your energy supplier for information about the
available connection tools.
M-B-us
R1
R2
P2
R1
The letters O and F indicate that the relay is open (O) or closed (F).
If the two built-in relays on the meter are not enough, an additional module
containing three more relays can also be fitted.
It is strictly forbidden for customers to interfere with these relays.
All tampering is detected.
Next to these two relays, Smarty also has a built-in M-Bus port that enables
an intelligent gas, water or heat meter to be connected.
16

Customer port

Your Smarty intelligent electricity meter has a
customer port that provides access to your "high
resolution" data (10 seconds).
To access the RJ12 (standard telephone) socket that
enables you to connect a remote screen or smart
home system, pull on the green flap and slide it
downwards. Connect the plug and close the flap
again.

Built-in relays

Smarty, your intelligent electricity meter includes
two output relays or contacts enabling it to control
electrical loads such as, for example, an electric
heater or even an electric car.
P1
These relays can be controlled independently either
via a fixed schedule programmed directly on the
M-B-us
meter or via a variable control system based on a
R2
P2
command sent on demand. Charge control services
may be offered to the customer by either the
network administrator or the supplier.
P1