Digilent PmodCLS Справочное руководство
Просмотреть онлайн или скачать pdf Справочное руководство для Блок управления Digilent PmodCLS. Digilent PmodCLS 4 страницы. Serial lcd display module
Также для Digilent PmodCLS: Справочное руководство (5 страниц)
Печатать страницуPmodCLS™ Reference Manual
Revised April 8, 2016
This manual applies to the PmodCLS rev. D-E
Overview
The Digilent PmodCLS is a 16x2 character LCD module driven by an Atmel®
The PmodCLS.
1
Functional Description
The PmodCLS module can be used to display important information during program development or as a user
interface after the project has been completed. The module is ideally suited for microcontroller boards but can
also be used in projects using a FPGA board.
The module is capable of executing a variety of instructions such as erasing specific characters, setting different
display modes, scrolling, and displaying user-defined characters. These instructions are specified using escape
sequences to send commands to the board's embedded Atmel ATmega48 microcontroller. The display on the
module is driven by this AVR and controls all of the features of the board.
2
Interfacing with the Pmod
The PmodCLS can communicate with the host board through the SPI, I
DOC#: 502-092
Other product and company names mentioned may be trademarks of their respective owners.
Features include:
16×2 liquid crystal character display
Wide range of instruction functions
Up to 32 user definable characters
Multiple communication options including
UART, SPI, and I²C
Small PCB size for flexible designs 1.8" ×
3.8" (4.6 cm × 9.7 cm)
Two 1×6-pin Pmod ports with SPI and UART
interfaces
Library and example code available in
resource center
2
C, and UART ports.
Copyright Digilent, Inc. All rights reserved.
1300 Henley Court
Pullman, WA 99163
www.digilentinc.com
ATmega48
microcontroller.
509.334.6306
Page 1 of 3