FIAMA P2X0T Краткое руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Позиционеры клапанов FIAMA P2X0T. FIAMA P2X0T 11 страниц. Positioner with analog output

Печатать страницу

IMMEDIATE POSITIONING

Immediate positioning mode allows you to set a positioning dimension to perform as soon as the START input

is activated.

Press

PGM

RESET/ENTER the display shows the current dimension value, on the auxiliary display il display

Press

RESET/ENTER

By means of the keys

required positioning dimension.

Press

RESET/ENTER and the current dimension will be visualized again: now, when you close the

START input, the positioner starts the positioning to the required dimension and ,once the dimension has been

reached, it activates the positioning end output.

To proceed to another immediate positioning press RESET/ENTER and repeat the previouses operations.

Press PGM to exit the immediate positioning mode.

SETTING UP OF POSITIONING DIMENSIONS, OF NUMBER OF

PIECES

The positioner can store until 99 dimensions, that can be grouped together in many positioning programs.

There isn't a limit to the number of dimensions in each program, but the amount of dimensions of all programs

together can not be more than 99. For each dimension it is possible to set the number of pieces to

manufacture in sequence (max. 9999).

Press

PGM

Press

RESET/ENTER

With the key

(increase of the flashing digit) and

confirm by RESET/ENTER.

N.B.: In the machinery constant exist one constant for remove the dimensions from password protection.

When you have entered into set of the dimensions, the display show the value of the dimension 1 and on the

auxiliary display appear 01 (dimension index) and afterwards

Press

and

to select the dimension you want to set between all the 99 dimensions, the auxiliary display

shows the current dimension.

Press RESET/ENTER to enter dimension setting: the first digit from the right will be flashing.

By means of the keys

required positioning dimension.

Press RESET/ENTER the number of pieces to be manufactured, relating to the set dimension, will be

visualised; on the auxiliary display it appears "

confirm by RESET/ENTER

NB The value n.P.=0 do not enable the relay of end positioning.

Now the display will show

the current dimension is the end or not of the positioning program.

RESET/ENTER the program execution will proceed with the other dimensions, pressing instead the key

the display will show

confirm by RESET/ENTER.

For set the next positioning dimension repeat the previous operations.

data: 13/01/16

to enter programming mode: on the display the writing

the writing "

." will appear.

the display will be zeroset (or shows the last set dimension) il display si azzera

(o mostra l'ultima quota impostata), being the first digit on the right flashing

(increment of flashing digit value) and

to enter the programming mode: the writing

to select the menu

the display show 000 with the first digit flashing: this is the password request.

(increment of flashing digit value) and

and on the auxiliary display the dimension index. At this point you decide if

and the current dimension will become the end of the positioning program: then

File: P2XT_smd_ing.doc

(selection of flashing digit) set up the

(selection of the flashing digit) set the value 273 and

.", press RESET/ENTER and insert the required value and

will appear.

appears on the display

(selection of flashing digit) set the

If you confirm

pressing

pag 3 di 10