Cres Cor H135WUA11240 Инструкции по эксплуатации и техническому обслуживанию - Страница 3
Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и техническому обслуживанию для Ящик для подогрева Cres Cor H135WUA11240. Cres Cor H135WUA11240 4 страницы. Hot cabinet (aluminum/stainless steel)
Печатать страницу5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
H135WSUA11 Hot Cabinet (Stainless Steel)
HOW TO CLEAN UNIT:
DOORS
Vinyl (Out)
Dirt, Grease and Oil
Aluminum (In)
Dirt
CABINETS
(H137WUA11 is
Aluminum)
(H137WSUA11
Fingerprints, Grease
is
and Oil
Stainless Steel)
Water Spots
TROUBLE-SHOOTING CHART:
FAILURE
1. Indicator lights do NOT light.
2. Unit does not heat
3. Unit gets too hot or won't shut off
4. Humidity is low.
5. Blower does not work or makes noise.
NOTE: Optional digital thermometer will flash if cabinet temperature is below 140°F or above 250°F.
Call the Factory if you need different settings.
If cause is none of the above, refer to our list of Authorized Service Centers, FL-1400.
CABINET
Door Assembly, Aluminum
Door Assembly, Red
Door Assembly, Stainless Steel
Door Gasket
Door Hinge
Door Latch
Pan Slides
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
for H135WUA11 Hot Cabinet (Aluminum)
Soil
Cleaner
Mild Detergent* and water.
Mild detergent* and hot water, or
mild abrasive cleaner.
Steam (No strong alkaline additive)
Chemical oven cleaner for cabinet
material
Mild abrasive cleaner; oily or waxy
cleaner
Mild abrasive cleaner.
Oily or waxy cleaner.
*Mild detergents include soaps and non-abrasive cleaners.
W/BLACK FRAME
1200-495-BL-K
1200-499-BL-K
-
0861-259-K
0519-104-K
1006-154-01-K
0621-281-K
1. Wipe with soft, damp cloth.
2. Rinse well.
1. Use soft, damp cloth.
2. Rinse with hot water.
3. Wipe dry.
1. Rinse after steam cleaning.
2. Wipe dry.
Follow oven cleaner manufacturer's
directions
Apply with clean, soft cloth. Wipe with
damp cloth.
Apply with soft, clean cloth.
Wipe with damp cloth.
POSSIBLE CAUSE
1a. Circuit breaker/fuse to wall outlet blown.
2a. Cord unplugged from wall outlet or cabinet.
3a. Switch is "OFF."
2a. Thermostats set too low or are off.
2b. Switch is "OFF."
3a. Defective electrical parts.
3b. UNPLUG UNIT FROM WALL OUTLET
4a. Water in pan may be low
4b. Thermostat set too low
5a. Defective Blower
W/O BLACK FRAME
1221-571-K
1221-571-RK
1221-571-SS
0861-271-K
0519-104-K
1006-154-01-K
0621-281-K
FL-2334
Hot Cabinets
Rev. 2 (3/13)
Page 3 of 4
Method