Digimerge DPP22W Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Камера безопасности Digimerge DPP22W. Digimerge DPP22W 20 страниц. Ultra resolution wdr day/night camera
Печатать страницу¡á Installation
¡á Lens
Lenses are sold separately. Lenses such as auto iris lens,
CS-Mount lens and C-Mount lens can be used.
Note
¤ý Use of the DC auto iris lens is recommended to achieve the best
results for operating this product effectively.
¤ý Keep the lens clean.
¤ý Any foreign objects and fingermarks on the lens can cause inferior
image quality in low light level conditions.
When using an auto iris lens
1. Peel off about 8mm of the outer skin of the auto iris lens cable.
2. Peel off about 2mm of the outer skin of the insulated conductor inside the
lens cable.
Ultra Resolution WDR Day/ Night Camera
12
3. Remove the cover of the auto iris lens connection plug and solder the
lens cable to the connector pin in the plug.
Pin No.
DC
No.1 Pin
Damping-
No.2 Pin
Damping+
No.3 Pin
Drive+
No.4 Pin
Dreve-
4. Replace the auto iris lens connection plug cover and take off the lens
protection cap, and then attach the auto iris lens to the camera by
screwing it in clockwise.
5. Insert the connection plug that is connected to the auto iris lens cable into
the auto lens connector, which is located on the back of the camera.
6. Set the lens selection switch, located on
the back of the camera, to DC or VIDEO
depending on the type of auto iris lens which is
being used.
Installation ¡á
LENS
VIDEO
Red(power)
NC
White(video signal)
Black(GND)
OSD EXTRA
IRIS JACK
VIDEO OUT
POWER
DC
SET
AC 24V IN
VIDEO
DC12V IN
13
Ultra Resolution WDR Day/Night Camera