Accusound ES40 Eclipse Series Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Система домашнего кинотеатра Accusound ES40 Eclipse Series. Accusound ES40 Eclipse Series 4 страницы. Eclipse series home theatre system

Печатать страницу

Volume Control

Subwoofer Control Panel

The volume control runs from 0-10. We suggest the volume be set to 5 and then controlled by the

subwoofer setting on your receiver. When listening to movies or music make sure that the subwoofer

does not go into distortion. You can hear this as a distorted crackling sound which is usually caused

when the subwoofer level on your receiver is set too high. Ease the volume back so you get a good

solid bass. This will ensure the subwoofer will play for years to come.

Crossover

The crossover is the heart of the ES40 system. As you turn the crossover control up you add upper

bass. The best setup is to fill the gap between the speakers that can not produce lower bass. At normal

levels the speakers go down to 120Hz. The control starts at 40Hz and goes to 200Hz. We suggest

around 120 Hz to start. You can add or decrease the frequency to achieve the correct balance for either

music or movies. The control only adds higher frequency. It does not alter the low frequency.

Base Extension

This control adds extra depth to the frequency you have the crossover control set to. We call this bass

extension. The control starts at 0dB which is normal. If you find you are not getting the extra bass and

feeling from the subwoofer you can increase the Bass Extension to get the desired effect.

Phase Control

This function adjusts the phase of the subwoofer driver. This adjustment is required to ensure that the

subwoofer and all other associated loudspeakers operate "in sync." If your main speakers are at the

front of the room the woofers are pushing forward. If your subwoofer is at the front of the room the

woofer will be pushing forward. Turn the phase control to 0. At the back of the room the subwoofer is

pushing in an opposite direction. Turn the phase control to 180 degrees and the subwoofer will fire in

the opposite direction and be in sync. If you place the subwoofer at the side of the room you run

between 40~160 degrees. To hear bass all around the room you will have to adjust the phase to find the

best setting.

Wiring Diagram