Cisco 3020 - Cisco Catalyst Blade Switch Руководство по началу работы - Страница 19

Просмотреть онлайн или скачать pdf Руководство по началу работы для Переключатель Cisco 3020 - Cisco Catalyst Blade Switch. Cisco 3020 - Cisco Catalyst Blade Switch 37 страниц. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Также для Cisco 3020 - Cisco Catalyst Blade Switch: Руководство по началу работы (31 страниц), Quickspecs (12 страниц), Примечание к выпуску (41 страниц), Примечание к выпуску (27 страниц), Примечание к выпуску (23 страниц), Примечание к выпуску (21 страниц), Руководство по установке (21 страниц)

Refreshing the PC IP Address

After you complete Express Setup, you should refresh the PC IP address:

• For a dynamically assigned IP address, disconnect the PC from the switch module, and reconnect

the PC to the network. The network DHCP server assigns a new IP address to the PC.

• For a statically assigned IP address, change it to the previously configured IP address.

After you complete Express Setup and install the switch module in your network, use the device

manager or other management options described in this section for further configuration.

The simplest way to manage the switch module is by using the device manager that is in the switch

module memory. This is a web interface that offers quick configuration and monitoring. You can

access the device manager from anywhere in your network through a web browser.

Follow these steps:

1. Launch a web browser on your PC or workstation.

2. Enter the switch module IP address in the web browser, and press Enter. The device manager page

appears.