Byetta PEN Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Ручка для инсулина Byetta PEN. Byetta PEN 12 страниц.

Печатать страницу

STEP A Check the Pen

• Wash hands prior to use.

• Check pen label to make sure it is

your 5 mcg pen.

• Pull off the blue pen cap.

STEP B Attach the Needle

•

Remove paper tab from outer

needle shield.

•

Push outer needle shield

containing the needle straight

onto the pen, then screw

needle on until secure.

STEP C Dial the Dose

•

Check that the

is in the

dose window. If not, turn

dose knob away from you

(clockwise) until it stops and

the

is in the dose window.

Note: If you cannot turn the dose knob away from you to the

Section 4 of this user manual.

STEP D Prepare the Pen

•

Point the needle of the pen up

and away from you.

Note: If you do not see liquid after 4 times, see Commonly Asked Questions, number 3, in Section 4 of this user manual.

BYETTA

(exenatide) injection

ONE-TIME-ONLY NEW PEN SETUP

• Check BYETTA in the cartridge.

The liquid should be clear,

colorless, and free of particles.

If not, do not use.

•

Pull off outer needle shield.

Do not throw away.

•

Pull dose knob out until it

stops and the

dose window.

PUSH & HOLD

•

Use thumb to firmly push

injection button in until it

stops, then continue holding the

injection button in while slowly

counting to 5.

•

If you do not see a stream or

several drops come from the

needle tip, repeat Steps C & D.

Note: Small air bubbles in the

cartridge are normal.

•

Pull off inner needle shield

and throw away. A small drop

of liquid may appear. This is

normal.

•

Turn dose knob away from

is in the

you until it stops at

Make sure that the 5 with the

line under it is in the center of

the dose window.

, see Commonly Asked Questions, number 7, in

•

Pen preparation is complete

when the

of the dose window and

you have seen a stream or

several drops come from the

needle tip.

is in the center