Cisco 4500-M Руководство по обновлению - Страница 15
Просмотреть онлайн или скачать pdf Руководство по обновлению для Переключатель Cisco 4500-M. Cisco 4500-M 24 страницы. Upgrading memory
Также для Cisco 4500-M: Руководство по установке (18 страниц), Руководство по замене (16 страниц)
Печатать страницу
Figure 11
Removing Main Memory SIMMs
3.
The socket guide posts
release through the SIMM
holes (on both sides).
1.
Pull the locking spring clips
(on both sides) outward to
enable the SIMM to rock
forward. The SIMM will
not release unless
the clips have cleared
the back of the SIMM.
2. Push the SIMM down andforward.
3.
The socket guide posts release
through the SIMM holes
(on both sides).
1.
Pull the locking spring clips
outward to enable the SIMM
to rock forward. The SIMM will
not release unless the clips have
cleared the back of the SIMM.
You will feel some resistance, but do not use excessive force on the SIMM and do not
Caution
touch the surface components to avoid damaging them.
Repeat Step 2 through Step 5 for each main memory SIMM.
Step 6
If you have completed all SIMM replacement procedures, proceed to the section "Replacing
Network Processor Modules" on page 22.
Upgrading Cisco 4500, Cisco 4500-M, Cisco 4700, and Cisco 4700-M Memory
Top view
Front of the chassis
2. Push the SIMM down and forward.
Side view
Memory Replacement Procedures
SIMM
polarization
notch
15