Cisco Catalyst 2900 Series XL Краткое руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Переключатель Cisco Catalyst 2900 Series XL. Cisco Catalyst 2900 Series XL 12 страниц. 10/100 autosensing fast ethernet switches
Также для Cisco Catalyst 2900 Series XL: Обзор (6 страниц), Краткое руководство по эксплуатации (13 страниц)
Печатать страницу
CONSOLE
CONSOLE
RJ-45
console port
RJ-45-to-RJ-45
rollover cable
Connect the AC Power Cord
1
Connect one end of the supplied AC
power cable to the switch rear panel.
Note: If you are connecting to a Cisco
600W AC redundant power system (RPS),
refer to the Catalyst 2900 Series XL
Installation Guide and the Cisco Redundant
Power System Hardware Installation Guide
for more information.
2
Connect the other end of the power
cable to a grounded AC outlet.
Connect to Your Console
1
Connect the supplied flat, blue, rollover
cable to the CONSOLE port on the
switch rear panel.
DC INPUTS FOR REMOTE
DC INPUTS FOR REMOTE
POWER SUPPLY
POWER SUPPLY
SPECIFIED IN MANUAL.
SPECIFIED IN MANUAL.
+5V
+5V
@24A, +12V
@24A, +12V
@1.0A
@1.0A
DC INPUT
DC INPUT
RJ-45-to-DB-9 adapter
(labeled TERMINAL)
2
Connect the other end of the cable to a
terminal or PC with terminal-emulation
software. Use one of the supplied
adapters if you need to.
The terminal or emulation software
must match the settings on the console
port. Check your terminal or emulation
software to be sure it matches the
settings listed below, and reconfigure it if
it does not.
— 9600 baud
— No parity
— 8 data bits
— 1 stop bit
RATING
RATING
100-120/200-2 40V
100-120/200-2 40V
2.0A/1.0A 50-60HZ
2.0A/1.0A 50-60HZ
3